This is pdfeTeX, Version 3.141592-1.21a-2.2 (Web2C 7.5.4) (format=latex 2005.5.9) 29 SEP 2005 14:06 entering extended mode **s3.tex (./s3.tex LaTeX2e <2003/12/01> Babel and hyphenation patterns for american, french, german, ngerman, b ahasa, basque, bulgarian, catalan, croatian, czech, danish, dutch, esperanto, e stonian, finnish, greek, icelandic, irish, italian, latin, magyar, norsk, polis h, portuges, romanian, russian, serbian, slovak, slovene, spanish, swedish, tur kish, ukrainian, nohyphenation, loaded. (/usr/share/texmf/tex/latex/base/latex209.def File: latex209.def 1998/05/13 v0.52 Standard LaTeX file Entering LaTeX 2.09 COMPATIBILITY MODE ************************************************************* !!WARNING!! !!WARNING!! !!WARNING!! !!WARNING!! This mode attempts to provide an emulation of the LaTeX 2.09 author environment so that OLD documents can be successfully processed. It should NOT be used for NEW documents! New documents should use Standard LaTeX conventions and start with the \documentclass command. Compatibility mode is UNLIKELY TO WORK with LaTeX 2.09 style files that change any internal macros, especially not with those that change the FONT SELECTION or OUTPUT ROUTINES. Therefore such style files MUST BE UPDATED to use Current Standard LaTeX: LaTeX2e. If you suspect that you may be using such a style file, which is probably very, very old by now, then you should attempt to get it updated by sending a copy of this error message to the author of that file. ************************************************************* \footheight=\dimen102 \@maxsep=\dimen103 \@dblmaxsep=\dimen104 \@cla=\count79 \@clb=\count80 \mscount=\count81 (/usr/share/texmf/tex/latex/base/tracefnt.sty Package: tracefnt 1997/05/29 v3.0j Standard LaTeX package (font tracing) \tracingfonts=\count82 LaTeX Info: Redefining \selectfont on input line 101. ) \symbold=\mathgroup4 \symsans=\mathgroup5 \symtypewriter=\mathgroup6 \symitalic=\mathgroup7 \symsmallcaps=\mathgroup8 \symslanted=\mathgroup9 LaTeX Font Info: Redeclaring math alphabet \mathbf on input line 293. LaTeX Font Info: Redeclaring math alphabet \mathsf on input line 294. LaTeX Font Info: Redeclaring math alphabet \mathtt on input line 295. LaTeX Font Info: Redeclaring math alphabet \mathit on input line 301. LaTeX Info: Redefining \em on input line 311. (/usr/share/texmf/tex/latex/base/latexsym.sty Package: latexsym 1998/08/17 v2.2e Standard LaTeX package (lasy symbols) \symlasy=\mathgroup10 LaTeX Font Info: Overwriting symbol font `lasy' in version `bold' (Font) U/lasy/m/n --> U/lasy/b/n on input line 47. ) LaTeX Font Info: Redeclaring math delimiter \lgroup on input line 375. LaTeX Font Info: Redeclaring math delimiter \rgroup on input line 377. LaTeX Font Info: Redeclaring math delimiter \bracevert on input line 379. (/usr/share/texmf/tex/latex/base/latex209.cfg File: latex209.cfg 2001/06/05 v1.0 teTeX customized LaTeX 2.09 compatibility mo de setup ) (/usr/share/texmf/tex/latex/tools/rawfonts.sty Package: rawfonts 1994/05/08 Low-level LaTeX 2.09 font compatibility (/usr/share/texmf/tex/latex/tools/somedefs.sty Package: somedefs 1994/06/01 v0.03 Toolkit for optional definitions ) LaTeX Font Info: Try loading font information for U+lasy on input line 44. (/usr/share/texmf/tex/latex/base/ulasy.fd File: ulasy.fd 1998/08/17 v2.2e LaTeX symbol font definitions ))) (/usr/share/texmf/tex/latex/base/article.cls Document Class: article 2004/02/16 v1.4f Standard LaTeX document class (/usr/share/texmf/tex/latex/base/size11.clo File: size11.clo 2004/02/16 v1.4f Standard LaTeX file (size option) ) \c@part=\count83 \c@section=\count84 \c@subsection=\count85 \c@subsubsection=\count86 \c@paragraph=\count87 \c@subparagraph=\count88 \c@figure=\count89 \c@table=\count90 \abovecaptionskip=\skip41 \belowcaptionskip=\skip42 Compatibility mode: definition of \rm ignored. Compatibility mode: definition of \sf ignored. Compatibility mode: definition of \tt ignored. Compatibility mode: definition of \bf ignored. Compatibility mode: definition of \it ignored. Compatibility mode: definition of \sl ignored. Compatibility mode: definition of \sc ignored. LaTeX Info: Redefining \cal on input line 506. LaTeX Info: Redefining \mit on input line 507. \bibindent=\dimen105 ) (./mymacros.sty \linewid=\skip43 ) (./gatsman.sty \pageheaderlineskip=\dimen106 \pagefooterlineskip=\dimen107 \funindent=\dimen108 \argindent=\dimen109 \arg@dim=\dimen110 \arg@indent=\dimen111 \line@siz=\dimen112 \arg@box=\box26 ) (./s3.aux) \openout1 = `s3.aux'. LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 2. LaTeX Font Info: ... okay on input line 2. LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 2. LaTeX Font Info: ... okay on input line 2. LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 2. LaTeX Font Info: ... okay on input line 2. LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 2. LaTeX Font Info: ... okay on input line 2. LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 2. LaTeX Font Info: ... okay on input line 2. LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 2. LaTeX Font Info: ... okay on input line 2. LaTeX Font Info: External font `cmex10' loaded for size (Font) <14.4> on input line 8. LaTeX Font Info: External font `cmex10' loaded for size (Font) <7> on input line 8. [0 ] LaTeX Font Info: Try loading font information for OMS+cmr on input line 26. (/usr/share/texmf/tex/latex/base/omscmr.fd File: omscmr.fd 1999/05/25 v2.5h Standard LaTeX font definitions ) LaTeX Font Info: Font shape `OMS/cmr/m/n' in size <12> not available (Font) Font shape `OMS/cmsy/m/n' tried instead on input line 26. ! Undefined control sequence. \@package l.35 \newpage ? q OK, entering \batchmode... ! Undefined control sequence. \@rpttype l.35 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.35 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [1] (./s3.toc LaTeX Font Info: External font `cmex10' loaded for size (Font) <10.95> on input line 3. LaTeX Font Info: External font `cmex10' loaded for size (Font) <8> on input line 3. LaTeX Font Info: External font `cmex10' loaded for size (Font) <6> on input line 3. ! Undefined control sequence. \@package l.22 ...x \voidb@x \hbox {\rm S}^3$\,}Example}{20} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.22 ...x \voidb@x \hbox {\rm S}^3$\,}Example}{20} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.22 ...x \voidb@x \hbox {\rm S}^3$\,}Example}{20} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [2]) \tf@toc=\write3 \openout3 = `s3.toc'. ! Undefined control sequence. \@package l.39 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.39 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.39 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [3] (./s3.lof) \tf@lof=\write4 \openout4 = `s3.lof'. ! Undefined control sequence. \@package l.43 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.43 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.43 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [4] (./s3.lot) \tf@lot=\write5 \openout5 = `s3.lot'. ! Undefined control sequence. \@package l.46 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.46 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.46 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [5] (./psfig.tex \@unused=\write6 psfig/tex 1.2-dvips \ps@stream=\read1 ) ! Undefined control sequence. \@package l.95 \begin{enumerate} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.95 \begin{enumerate} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.95 \begin{enumerate} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [1 ] (./testitpdt.tex) ! Undefined control sequence. \@package l.136 \end{figure} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.136 \end{figure} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.136 \end{figure} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [2] ! Undefined control sequence. \@package l.159 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.159 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.159 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [3] (./testitpct.tex) ! Undefined control sequence. \@package l.196 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.196 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.196 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [4] ! Undefined control sequence. \@package l.239 \item C heck datasets for bounds violations. The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.239 \item C heck datasets for bounds violations. The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.239 \item C heck datasets for bounds violations. The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [5] psfig: searching execution.eps for bounding box psfig: including execution.eps psfig: searching creation.eps for bounding box psfig: including creation.eps LaTeX Font Info: Font shape `OMS/cmr/m/n' in size <10.95> not available (Font) Font shape `OMS/cmsy/m/n' tried instead on input line 271. ! Undefined control sequence. \@package l.274 \item C hange the parameters being passed to a routine. The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.274 \item C hange the parameters being passed to a routine. The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.274 \item C hange the parameters being passed to a routine. The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [6] ! Undefined control sequence. \@package l.279 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.279 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.279 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [7] ! Undefined control sequence. \@package l.327 \end{eqnarray*} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.327 \end{eqnarray*} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.327 \end{eqnarray*} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [8] ! Undefined control sequence. \@package l.380 \[ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.380 \[ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.380 \[ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [9] ! Undefined control sequence. \@package l.421 \[ \mbox{\rm STATIC : } , , \cdots , ; \] The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.421 \[ \mbox{\rm STATIC : } , , \cdots , ; \] The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.421 \[ \mbox{\rm STATIC : } , , \cdots , ; \] The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [10] ! Undefined control sequence. \@package l.449 \[ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.449 \[ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.449 \[ The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [11] ! Undefined control sequence. \@package l.492 \begin{itemize} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.492 \begin{itemize} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.492 \begin{itemize} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [12] ! Undefined control sequence. \@package l.540 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.540 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.540 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [13] ! Undefined control sequence. \@package l.581 \item V erbose mode (-v command line option) displays information con... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.581 \item V erbose mode (-v command line option) displays information con... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.581 \item V erbose mode (-v command line option) displays information con... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [14] LaTeX Font Info: External font `cmex10' loaded for size (Font) <12> on input line 593. ! Undefined control sequence. \@package l.628 \item C reate a temporary directory for use during the installation p... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.628 \item C reate a temporary directory for use during the installation p... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.628 \item C reate a temporary directory for use during the installation p... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [15] ! Undefined control sequence. \@package l.676 \item O nce the environmental variables have been set, make sure you ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.676 \item O nce the environmental variables have been set, make sure you ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.676 \item O nce the environmental variables have been set, make sure you ... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [16] ! Undefined control sequence. \@package l.717 \item C hanging the name, size, type or dimensionality of a dataset t... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.717 \item C hanging the name, size, type or dimensionality of a dataset t... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.717 \item C hanging the name, size, type or dimensionality of a dataset t... The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [17] ! Undefined control sequence. \@package l.761 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.761 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.761 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [18] ! Undefined control sequence. \@package l.762 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.762 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.762 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [19] psfig: searching sdas-pct.eps for bounding box psfig: including sdas-pct.eps ! Undefined control sequence. \@package l.775 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.775 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.775 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [20] ! Undefined control sequence. \@package l.775 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.775 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.775 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [21] (./pdt.tex) ! Undefined control sequence. \@package l.781 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.781 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.781 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [22 ] ! Undefined control sequence. \@package l.781 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.781 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.781 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [23] ! Undefined control sequence. \@package l.781 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.781 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.781 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [24] (./pct.tex) ! Undefined control sequence. \@package l.786 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.786 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.786 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [25 ] ! Undefined control sequence. \@package l.786 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.786 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.786 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [26] ! Undefined control sequence. \@package l.786 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.786 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.786 \clearpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [27] ! Undefined control sequence. \@package l.795 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.795 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.795 \newpage The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [28 ] (./get_eol.tex ! Undefined control sequence. \@package l.37 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.37 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.37 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [29 ]) (./get_eoi.tex ! Undefined control sequence. \@package l.41 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.41 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.41 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [30 ]) (./set_eol.tex ! Undefined control sequence. \@package l.36 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.36 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.36 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [31 ]) (./set_eoi.tex ! Undefined control sequence. \@package l.37 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.37 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.37 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [32 ]) (./increment.tex ! Undefined control sequence. \@package l.25 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.25 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.25 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [33 ]) (./decrement.tex ! Undefined control sequence. \@package l.25 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.25 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.25 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [34 ]) (./resize.tex ! Undefined control sequence. \@package l.22 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.22 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.22 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [35 ]) (./ise.tex ! Undefined control sequence. \@package l.27 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.27 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.27 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [36 ]) (./dsz.tex ! Undefined control sequence. \@package l.26 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.26 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.26 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [37 ]) (./ifthenelse.tex ! Undefined control sequence. \@package l.23 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.23 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.23 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [38 ]) (./call_sys.tex ! Undefined control sequence. \@package l.21 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.21 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.21 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [39 ]) (./copyf.tex ! Undefined control sequence. \@package l.25 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. \@rpttype l.25 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. ! Undefined control sequence. Version \@version l.25 \end{manpage} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. [40 ]) (./s3.aux) LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. ) Here is how much of TeX's memory you used: 859 strings out of 94501 9230 string characters out of 1171248 59050 words of memory out of 1000000 3979 multiletter control sequences out of 10000+50000 26009 words of font info for 96 fonts, out of 500000 for 2000 580 hyphenation exceptions out of 1000 25i,11n,22p,272b,278s stack positions out of 1500i,500n,5000p,200000b,5000s Output written on s3.dvi (46 pages, 88180 bytes).